There are many systems that are available in a centralized lubrication systems. Our engineer checks on all the details of the system, some points that decide on the type of system to be installed are as follows, to give a fair idea of the system the customer is required to answer the basic questions which are as follows
Type of machine on which lubrication is required? With make if possible
Whether Grease, Oil or Mist lubrication is required
The grade of oil or Grease to be used Eg NLGI 1, Enklo 68
The quantity of lubricant required for each point
What is the drive that is required Manual/Pneumatic/ Electrical/Hydraulic
If electric drive required single phase/three phase/ DC required with HP
Is Automation required
No of points to be lubricated
The approximate distance of each point from each other
Total length of the machine
Atmospheric conditions near the machine Like eg. A furnace will have very high temp near it. Whether the same is true for the machine to be lubricated or not
Is plan for the location of pump, divider valves etc available or the same have to be studied and designed by us
Any other point required to be mentioned by you as regards the machinery to be lubricated.
The above questionnaire will help our engineers in designing the best system for your requirement.